The bottle cap of PET food plastic bottles is a very important part, especially for the inspection of the tightness of hdpe bottle caps, how is the tightness of hdpe bottle caps checked?
In the testing standard of hdpe bottle caps, there are clear requirements for the sealing performance testing of the bottle caps. According to the different use of the bottle cap, there are different regulations on the measurement methods of non-gas cap and gas cap.
It is necessary to cut off the anti-theft ring (strip) of the bottle cap, seal it with rated torque of not less than 1.2NM, test with a sealing tester, pressurize it to 200kPa, maintain the pressure under water for 1 minute, and observe whether there is gas leakage or trip.
The gas cap is pressurized to 690kPa, maintain the pressure under water for 1 minute, and observe whether there is gas leakage, then increase the pressure to 1207kPa, maintain the pressure for 1 minute, and observe whether the cap is slipped.
hdpe bottle caps https://www.plasticsproduct.com/1250ml-114mm-hdpe-bottle.html